Notes library · Technical
⛰️ Tunnel Engineering & Rock Mechanics Notes
Intact rock and rock mass properties, discontinuities, exploration and RQD, RMR and Q classification, drill-and-blast, NATM and support, lining, waterproofing and grouting, tunnel surveying, monitoring and safety.
6 of 6 chapters written
Chapters
- 01Rock Mass & Intact Rock Properties, Discontinuities & Index TestsThe difference between intact rock and rock mass, engineering classification of rock strength, the main mechanical properties (UCS, tensile strength, modulus, Poisson's ratio, density), weathering grades, discontinuities and how they are described, index tests (point-load test, Schmidt hammer, Brazilian test), failure criteria (Mohr–Coulomb, Hoek–Brown) and how design properties are chosen for tunnels.Read →
- 02Site Exploration, Core Logging, RQD & Rock Mass ClassificationHow the ground for a tunnel is investigated — desk study, geological mapping, geophysics and boring — how a rock core is logged and its recovery and RQD calculated, and the two main classification systems: Bieniawski's Rock Mass Rating (RMR) and Barton's Q-system, with support recommendations, stand-up time and worked examples.Read →
- 03Drill-and-Blast TunnellingThe drill-and-blast method of excavating rock tunnels — the excavation cycle, full-face and heading-and-bench methods, drilling equipment and hole patterns (cut, easers, contour, lifters), explosives and initiation, smooth blasting and overbreak control, ventilation, mucking and scaling, blast vibration limits, safety, and quantities for one round.Read →
- 04NATM & Tunnel SupportThe principles of the New Austrian Tunnelling Method (NATM) — using the rock mass itself as the main load-bearing element — the excavation sequence, primary support elements (shotcrete, rock bolts, mesh, lattice girders and steel ribs, forepoling and pipe umbrellas), support classes from RMR or Q, rock load (Terzaghi), the convergence–confinement idea, and monitoring to control the support.Read →
- 05Tunnel Lining, Waterproofing & GroutingThe layers of a tunnel lining (primary and final), cast-in-situ and precast segmental linings, lining design loads, waterproofing systems (membranes, water-stops, drainage), water-tightness classes, pre-grouting ahead of the face, consolidation, contact and curtain grouting, grout materials, Lugeon test and grouting control.Read →
- 06Tunnel Setting-Out, Monitoring, QA/QC & SafetySurveying for tunnels — control networks, transfer of line and level underground, gyro and laser guidance, breakthrough accuracy; instrumentation and monitoring — convergence, extensometers, load cells, settlement and piezometers with alert–alarm–action trigger levels; quality assurance of shotcrete, bolts, grouting and lining; and safety — ventilation, gases, blasting, ground falls, fire and emergency escape.Read →
Exams that include Tunnel Engineering & Rock Mechanics
Open your exam to see only the chapters its syllabus asks for.