Notes library · Technical

☀️ Renewable Energy Engineering Notes

Biomass and biogas, gasifiers, biofuels, solar PV and thermal systems, and wind energy conversion.

6 of 6 chapters written

Chapters

  1. 01Biomass Conversion & Biogas PlantsBiomass as an energy source and its conversion routes (thermochemical, biochemical, physico-chemical); anaerobic digestion — four stages, microbes, and the factors affecting it (temperature, pH, C:N ratio, retention time, solids, loading rate); biogas composition and calorific value; KVIC floating-drum, Janata and Deenbandhu fixed-dome plants; plant sizing with worked examples; uses of gas and slurry; and Indian programmes (NBMMP, GOBARdhan, SATAT).Read →
  2. 02Gasifier TechnologyBiomass gasification — definition, difference from combustion and pyrolysis, the four zones (drying, pyrolysis, oxidation, reduction) and the main reactions; producer gas composition and calorific value; updraft, downdraft, cross-draft and fluidised-bed gasifiers with their merits; equivalence ratio, cold-gas and hot-gas efficiency; gas cleaning and cooling; use in engines and thermal applications; worked examples.Read →
  3. 03Bio-diesel & Bio-ethanol ProductionLiquid biofuels — bio-diesel (feedstocks such as Jatropha, Pongamia, used cooking oil; transesterification chemistry, catalyst, methanol ratio, process steps, properties, blending B5/B20) and bio-ethanol (feedstocks — sugarcane juice, molasses, grain; fermentation chemistry and theoretical yields, distillation, dehydration, first- and second-generation routes), fuel properties and blending, Indian biofuel policy and worked examples.Read →
  4. 04Solar Energy Fundamentals & PV SystemsThe sun as an energy source (solar constant, air mass, direct, diffuse and global radiation, insolation in India), measuring radiation (pyranometer, pyrheliometer, sunshine recorder), photovoltaic effect and cell types, I-V curve, fill factor, efficiency and temperature effect, module and array wiring, stand-alone, grid-connected and hybrid systems with charge controller, battery and inverter, PV water pumping, system sizing with worked examples, and Indian schemes (PM-KUSUM, PM Surya Ghar).Read →
  5. 05Solar Thermal SystemsConversion of sunlight to heat — flat-plate collector (parts, working, Hottel–Whillier equation, efficiency, collector heat-removal factor), evacuated-tube collectors, thermosyphon and forced-circulation water heaters, concentrating collectors (parabolic trough, dish, Fresnel, tower) and concentration ratio, solar air heaters and dryers, solar cookers (box, dish, community), solar stills and solar ponds, with worked sizing examples and Indian context.Read →
  6. 06Wind Energy Conversion SystemsOrigin of wind, wind speed measurement and variation with height (power law), wind power equation and Betz limit, power coefficient, tip-speed ratio, parts of a horizontal-axis wind turbine, HAWT vs VAWT (Savonius, Darrieus), cut-in, rated and cut-out speeds, capacity factor, wind pumps and water lifting, Weibull distribution, Indian wind-energy scenario, and worked examples with hand-checked numbers.Read →

Exams that include Renewable Energy Engineering

Open your exam to see only the chapters its syllabus asks for.