
APPSC AEE Civil Mock Test Series 2026
APPSC Assistant Executive Engineer (Civil) — Brief Notification No. 27/2026, 503 posts
🔄 Updated — new weekly practice set · exam date checked 6 Nov 2026
228
Tests Available
5480
Total Questions
2
Free Tests
🏆 Free APPSC AEE Civil full mock tests
From CivilGyan Mahamock — the full paper pattern, free for everyone, with solutions.
✅ Start here — these 2 tests are free
No payment · no card · full solutions included
🔓 Unlock all 228 tests in APPSC AEE Civil
2 free to try · 226 locked · One payment, valid 1 year · Detailed solutions & analytics
🔥 All-Access opens every series for ₹859 — less than 5 single series (₹945)
2 free · 226 locked · valid 1 year
🗓️ This week's practice · 16 Nov 2026
5 APPSC AEE Civil questions for this week
A fresh set every Monday from the exam's own subjects — try each, then open the answer. Next set on 23 Nov 2026.
Q1 · Soil Mechanics & Foundation Engineering
For a strip footing at the ground surface on a purely cohesive soil (φ = 0), Terzaghi's ultimate bearing capacity is:- A.5.14c
- B.5.7c
- C.9.0c
- D.2.0c
Show answerHide answer
Answer: B
For φ = 0, Terzaghi's factors are Nc = 5.7, Nq = 1 and Nγ = 0. With the footing at the surface (Df = 0), qu = c Nc = 5.7c. The value 5.14c is the Prandtl/Skempton value, not Terzaghi's.Q2 · Geography
A region with a very high sex ratio (females per 1000 males) is most likely to indicate:- A.Better female survival and/or male out-migration
- B.Rapid industrialisation of the region only
- C.A higher crude birth rate, and nothing else
- D.High infant mortality among the girl children
Show answerHide answer
Answer: A
A high sex ratio commonly reflects better female survival, longer female life expectancy or significant male out-migration, all of which increase the number of females relative to males.Q3 · Structural Analysis
The force method of structural analysis is also widely classified taxonomically as the:- A.Equilibrium matrix (joint) method
- B.Flexibility method (consistent deformations)
- C.Stiffness (slope-deflection) method
- D.Displacement (kinematic) method
Show answerHide answer
Answer: B
The force method selects redundant forces as the primary unknowns and utilizes compatibility equations solved via flexibility coefficients, making it synonymous with the flexibility method.Q4 · Hydrology & Irrigation
An irrigation outlet has a flexibility factor F = 1.25. If the parent canal discharge increases by 12 percent, calculate the corresponding percentage increase in the outlet discharge.- A.15.0 percent
- B.9.6 percent
- C.12.0 percent
- D.24.5 percent
Show answerHide answer
Answer: A
Flexibility F = (dQ / Q) / (dqc / qc). Substituting the parameters: 1.25 = (dQ / Q) / 0.12 ⇒ dQ / Q = 1.25 × 0.12 = 0.15, or 15.0 percent.Q5 · General Science
Which of the following organic structures belongs to the category of fat-soluble vitamins and plays a central role in blood coagulation pathways?- A.Vitamin C
- B.Vitamin B6
- C.Vitamin B12
- D.Vitamin K
Show answerHide answer
Answer: D
Vitamin K is a fat-soluble vitamin that serves as an essential cofactor for the γ-glutamyl carboxylase enzyme, which activates multiple blood-clotting proteins like prothrombin in the liver.
What is inside the APPSC AEE Civil mock test series
15
Full mocks
4
Previous-year papers
182
Chapter tests
27
Subject & sectional
Full-length APPSC AEE Civil mocks
- APPSC AEE Civil — Paper-3 — Civil Engineering — Full Mock Test 5 — 150 Q · 150 min
- APPSC AEE Civil — Paper-3 — Civil Engineering — Full Mock Test 4 — 150 Q · 150 min
- APPSC AEE Civil — Paper-3 — Civil Engineering — Full Mock Test 3 — 150 Q · 150 min
- APPSC AEE Civil — Paper-3 — Civil Engineering — Full Mock Test 2 — 150 Q · 150 min
- APPSC AEE Civil — Paper-3 — Civil Engineering — Full Mock Test 1 — 150 Q · 150 min
- APPSC AEE Civil — Paper-2 — Civil & Mechanical Engineering (Common) — Full Mock Test 5 — 150 Q · 150 min
- APPSC AEE Civil — Paper-2 — Civil & Mechanical Engineering (Common) — Full Mock Test 4 — 150 Q · 150 min
- APPSC AEE Civil — Paper-2 — Civil & Mechanical Engineering (Common) — Full Mock Test 3 — 150 Q · 150 min
- APPSC AEE Civil — Paper-2 — Civil & Mechanical Engineering (Common) — Full Mock Test 2 — 150 Q · 150 min
- APPSC AEE Civil — Paper-2 — Civil & Mechanical Engineering (Common) — Full Mock Test 1 — 150 Q · 150 min
- APPSC AEE Civil — Paper-1 — General Studies & Mental Ability — Full Mock Test 5 — 150 Q · 150 min
- APPSC AEE Civil — Paper-1 — General Studies & Mental Ability — Full Mock Test 4 — 150 Q · 150 min
APPSC AEE Civil subject-wise weightage
Average questions per paper, counted from 4 previous-year papers in this series.
| Subject | Avg questions / paper |
|---|---|
| Fluid Mechanics & Hydraulics | 40.0 (5–91) |
| Strength of Materials | 23.0 (0–59) |
| Environmental Engineering | 10.3 (0–21) |
| Structural Analysis | 9.8 (0–15) |
| Soil Mechanics & Foundation Engineering | 9.5 (0–22) |
| Hydrology & Irrigation | 9.0 (0–21) |
| Building Materials | 6.0 (0–13) |
| Steel Structures | 5.8 (0–16) |
| RCC Design | 5.8 (0–15) |
| Transportation Engineering | 5.8 (0–14) |
| Surveying | 4.8 (0–11) |
| Construction Management | 4.3 (0–10) |
| Current Affairs | 2.5 (0–10) |
| General Polity | 2.0 (0–8) |
Sample APPSC AEE Civil questions with solutions
From the free tests in this series — the rest of the series is written the same way.
Strength of Materials
1. A beam cross-section is structured such that its centroid matches its shear center. Which shape profile definitely does NOT satisfy this condition?
- A.Hollow circular tube
- B.I-section with equal flanges
- C.Channel section (C-shape)
- D.Rectangular solid section
Show answer & solution
Answer: C
A channel section is singly symmetric, meaning its centroid lies inside the profile area but its shear center is pushed out past the web wall, meaning they do not coincide.
Soil Mechanics & Foundation Engineering
2. A 25 mm thick clay specimen drains from both faces in an oedometer. If t₅₀ = 5 min and Tv(50%) = 0.197, the coefficient of consolidation is:
- A.2.05 × 10⁻⁷ m²/s
- B.4.10 × 10⁻⁷ m²/s
- C.1.03 × 10⁻⁷ m²/s
- D.8.20 × 10⁻⁷ m²/s
Show answer & solution
Answer: C
For double drainage Hdr = 25/2 = 12.5 mm = 0.0125 m, so Hdr² = 1.5625 × 10⁻⁴ m². Cv = Tv Hdr² / t = 0.197 × 1.5625 × 10⁻⁴ / (5 × 60) = 3.078 × 10⁻⁵ / 300 = 1.03 × 10⁻⁷ m²/s.
Strength of Materials
3. For a standard rectangular beam, what fraction of the total maximum shear stress occurs at a depth of d/4 from the top surface?
- A.0.67
- B.0.25
- C.0.75
- D.0.50
Show answer & solution
Answer: C
For a rectangle τ(y) = τmax[1 − (y/(d/2))²], with y measured from the neutral axis. A point d/4 below the top is at y = d/4, so τ = τmax[1 − (1/2)²] = 0.75 τmax.
APPSC AEE Civil test series — FAQs
How many tests are there in the APPSC AEE Civil mock test series?
228 tests with 5,480 questions in all: 15 full-length mocks, 4 previous-year papers, 182 chapter-wise tests, 27 subject and sectional tests. Every question has a detailed solution.
What does the APPSC AEE Civil test series cost?
₹189 for 12 months of the full APPSC AEE Civil series. 2 tests are free to attempt without paying. The All-Access Pass (₹859) opens every exam's series for 12 months.
Are APPSC AEE Civil previous year papers included?
Yes — 4 real papers as online tests with solutions: APPSC AEE Screening Test 2018 (GS + Civil & Mechanical); APPSC AEE Mains 2019 Paper-III Civil Engineering; APPSC AEE Paper-III Civil Engineering (22-08-2023, Shift 2); APPSC AEE Paper-II Civil & Mechanical (22-08-2023, Shift 1).
What is a APPSC AEE Civil full mock like?
Each full mock follows the exam's pattern — for example "APPSC AEE Civil — Paper-3 — Civil Engineering — Full Mock Test 5" has 150 questions in 150 minutes — and shows your score, rank, subject-wise accuracy and the solution to every question when you submit.
Can I try the APPSC AEE Civil series before paying?
Yes. These tests are free: Soil Mechanics & Foundation Engineering — Consolidation - 1; Strength of Materials — Bending and Shear Stress - 1. A free account is enough.
APPSC AEE Civil exam guide — pattern, syllabus, eligibility, salary →