Notes library · Technical

📐 Engineering Graphics & Drawing Notes

Drawing standards, scales, geometrical constructions, projections, sections, development and building drawing.

13 of 13 chapters written

Chapters

  1. 01Drawing Instruments, Standards, Lines & LetteringEngineering drawing as a graphic language; drawing instruments and materials — drawing board, mini-drafter/T-square, set squares, protractor, compass and dividers, French curves, templates, pencils (grades), erasers, clips; drawing sheet sizes (ISO A-series), layout, borders and title block; BIS SP 46 engineering drawing practice; types of lines and their applications, line thickness and precedence; lettering — single-stroke letters, Type A and Type B proportions, recommended heights, vertical and inclined lettering — with worked examples.Read →
  2. 02Scales & DimensioningNeed for scales; representative fraction (RF); full, reducing and enlarging scales; recommended scales (SP 46); length of scale; types — plain, diagonal, vertical (vernier), comparative and scale of chords, map scales; construction of plain and diagonal scales; vernier scales and least count; dimensioning — elements (dimension line, extension line, leader, arrowheads, dimension text), systems (aligned and unidirectional), methods (chain, parallel, progressive/coordinate, combined), dimensioning of circles, arcs, angles, chamfers and holes, symbols, general rules — with worked examples.Read →
  3. 03Geometrical Constructions & Engineering CurvesBasic geometrical constructions — bisecting lines and angles, parallel and perpendicular lines, dividing a line into equal parts, regular polygons (general method), inscribing and circumscribing circles, tangents and arcs; conic sections — definitions by eccentricity, ellipse (eccentricity, concentric circles, rectangle/oblong, arcs of circles methods), parabola (eccentricity, rectangle, tangent methods), hyperbola (eccentricity, rectangular hyperbola); cycloidal curves — cycloid, epicycloid, hypocycloid, trochoids; involutes; spirals (Archimedean, logarithmic); helices; tangents and normals; engineering applications — with worked numericals.Read →
  4. 04Orthographic ProjectionProjection and its types — parallel (orthographic, oblique) and central (perspective); principal planes of projection (VP, HP, PP), reference line XY and quadrants; first-angle and third-angle projection — positions of views and standard symbols; principal views (front, top, side) and choice of front view; six views; hidden lines and centre lines in views; rules for drawing and reading orthographic views; missing view problems; sectional views overview; conversion of pictorial views to orthographic views — with worked examples.Read →
  5. 05Isometric ProjectionPictorial projections — axonometric (isometric, dimetric, trimetric), oblique and perspective; isometric axes, lines and planes; isometric scale and its construction; isometric projection vs isometric drawing (view); non-isometric lines — box/coordinate method; isometric circles and arcs by the four-centre method; isometric views of prisms, pyramids, cylinders, cones, spheres and combined solids; conversion of orthographic views to isometric views; oblique projection — cavalier and cabinet — with worked numericals.Read →
  6. 06Projection of Points, Lines & PlanesProjection of points in all quadrants and notation; projection of straight lines — parallel, perpendicular and inclined to planes; true length, true inclinations (θ with HP, φ with VP) and apparent inclinations (α, β); lengths of front and top views; lines in profile plane; methods to find true length and inclinations (rotating line, trapezoidal, auxiliary plane); traces of lines; projection of planes — types, positions, traces, change of position (two-stage) method for planes inclined to one or both reference planes; true shape; with fully worked numericals.Read →
  7. 07Projection of SolidsClassification of solids — polyhedra (tetrahedron, cube, prisms, pyramids) and solids of revolution (cylinder, cone, sphere), frustums and truncated solids; terminology (base, axis, apex, lateral faces, generators, slant height); positions of solids — axis perpendicular to HP or VP, parallel to both, inclined to one plane, inclined to both; resting on base, edge, corner, face or generator; two-stage and three-stage (change of position) methods; visibility of edges; suspended solids; with worked examples of useful geometric dimensions.Read →
  8. 08Sections of Solids & Development of SurfacesNeed for sections; section planes and their positions (parallel to HP or VP, perpendicular to one and inclined to the other); sectional views, apparent section and true shape of section; hatching (section lines) conventions; types of sectional views — full, half, offset, aligned, revolved, removed, broken-out, and parts not sectioned; sections of prisms, pyramids, cylinders and cones (conic sections); development of surfaces — parallel line, radial line, triangulation and approximate methods; development of prisms, cylinders, pyramids, cones and truncated/frustum solids; applications in sheet metal work — with worked numericals.Read →
  9. 09Intersection of Solids & Auxiliary ViewsInterpenetration of solids and lines/curves of intersection; methods — line (generator) method and cutting plane method; intersections of prism with prism, cylinder with cylinder (equal and unequal diameters), cylinder with prism, cone with cylinder and cone with prism; visibility of intersection lines; applications in pipe joints, ducts and structures; auxiliary views — need, auxiliary vertical plane (auxiliary front view) and auxiliary inclined plane (auxiliary top view), primary and secondary auxiliary views, partial auxiliary views, true shape of inclined surfaces and true length of lines — with worked examples.Read →
  10. 10Building DrawingPurpose and types of building drawings — location plan, site plan, key plan, line diagram, plan, elevation, section, working and detail drawings, submission drawings, as-built drawings; conventions (IS 962) — scales, orientation, north line, section line through staircase and openings; principles of planning (aspect, prospect, privacy, grouping, roominess, furniture, sanitation, flexibility, circulation, elegance, economy, orientation); typical room dimensions and bye-law provisions; drawing of plan, section and elevation from a line diagram; staircase planning; drawings of doors, windows, foundations, roofs; services drawings — with worked examples.Read →
  11. 11Conventional Signs & Symbols (BIS)Need for conventional representation; BIS standards (SP 46, IS 962) and drawing conventions; material symbols in sections — brickwork, stone masonry, concrete (plain and reinforced), earth, sand, timber, glass, metals, insulation, water; symbols for doors, windows, ventilators, openings and stairs in plans; sanitary and plumbing fittings; electrical installation symbols; conventional representation of engineering features (threads, springs, gears, bearings, breaks, knurling, welds); surveying and map conventional signs and colours; reinforcement and structural steel representation; abbreviations — with worked examples.Read →
  12. 12Perspective Drawing, Colouring & ShadingPerspective projection and its characteristics; terminology — station point, picture plane, ground plane, ground line, horizon line, eye level, centre of vision, axis of vision, vanishing points, cone of vision; types — one-point (parallel), two-point (angular) and three-point (oblique) perspective; methods — visual ray method and vanishing point method; effect of position of station point and picture plane; perspective of simple solids and buildings; comparison with orthographic and isometric views; rendering — colour theory, media (pencil, ink, watercolour, poster colours), shading techniques (hatching, cross-hatching, stippling), sciagraphy (shadows), textures and entourage — with worked examples.Read →
  13. 13Inking, Tracing & Print MakingPencil drawing to finished drawing; inking tools — technical pens (standard pen widths), ruling pens, inks, erasing shields; order of inking and good inking practice; correcting inked drawings; tracing — purpose, tracing media (tracing paper, tracing cloth, polyester film), procedure and precautions; reproduction of drawings — blueprint (ferro-prussiate), diazo/ammonia (dyeline) prints, photocopying (xerography), large-format printing and plotting, scanning and digitisation, microfilming; folding of prints to A4 size; storage and handling of drawings — with worked examples.Read →

Exams that include Engineering Graphics & Drawing

Open your exam to see only the chapters its syllabus asks for.