← Agricultural Processing & Food Engineering · UPSSSC JE Agriculture

Chapter 1 of 8

Principles of Agricultural Processing & Grain Processing

In the UPSSSC JE Agriculture syllabus under Agricultural Processing & Food Engineering · 3 parts

📑 Contents (24 sections)

Part 1 of 3

Cleaning, Grading & Separation of Grains

Last reviewed 1 Oct 2026 · 7 min read

Why clean and grade?

Grain delivered from the field contains foreign material (straw, chaff, stones, dust, other crops, weed seeds, broken and shrivelled grain, insect-damaged kernels, metal pieces). Cleaning removes it; grading sorts the clean grain into uniform classes by size, shape, density or quality.

Benefits: better storage life (less moisture and infestation), higher market price, protection of machines (stones damage mills), uniform processing, seed purity, meeting quality standards (AGMARK, FSSAI limits for extraneous matter).

Basis of separation

Property Used to separate Machine
Size (width, thickness, length) Oversize and undersize material Sieves, screens, graders
Shape Round vs flat or long Indented cylinders, spiral, disc separators
Specific gravity (density) Heavy vs light Gravity table, destoner, floatation
Aerodynamic (terminal velocity) Light vs heavy Aspirators, winnowers, air-screen cleaners
Surface texture Rough vs smooth Velvet roll, inclined draper belt, magnetic separator (with powdered iron)
Colour and reflectance Discoloured, stained grain Photo-electric colour sorters
Electrical properties Conductive vs non-conductive Electrostatic separators
Magnetic properties Ferrous particles Magnets and magnetic drums
Frictional behaviour Rolling vs sliding Inclined belt or table

Machines for cleaning

1. Pre-cleaners and winnowers

  • Pre-cleaners remove large and light impurities before storage or drying. Winnowing fan — traditional hand or motor-driven fan that blows chaff away while grain falls.
  • Aspirators use an air stream in a duct to carry light matter upward and out, while grain falls through the stream.

2. Air-screen cleaner (the basic grain cleaner)

The commonest machine; it combines screens (to separate by size) and air (to separate by weight).

Parts: hopper and feed roll, pre-aspiration (air removing dust and light chaff at the entry), two or three oscillating screens (sieves), final aspiration, eccentric drive (shaking motion), fan and settling chamber.

Operation: the top (scalping) screen has larger holes that retain big impurities (stalks, pods, clods) while grain passes through; the second (grading) screen has holes just smaller than the grain, retaining the good grain while small seeds, sand and broken grain pass through; the air removes light chaff at the beginning and the end.

3. Screens (sieves)

Type Hole shape Separates by
Round-hole (perforated) Circular Width (diameter) of the grain
Oblong (slotted) hole Elongated slot Thickness
Triangular Triangular Shape and width (for specific seeds)
Woven-wire mesh Square General sieving, flour; mesh number = openings per inch

Sieve size is given as the hole diameter (mm) for perforated screens, or the mesh number (number of openings per linear inch) for wire mesh.

4. Indented cylinder separator (length grader)

A slowly rotating drum or disc with small pockets (indents) on the inner surface. Short grains (and broken) fit into the indents and are lifted and dropped into a trough; long grains stay in the cylinder and slide out the other end. Used for separating broken rice, oats from wheat, cockle and vetch from wheat, and length grading of rice. The pocket size is chosen for the length of the grain to be removed.

5. Disc separator

A series of discs with indents on their face on a rotating shaft; the grains are lifted by the indents according to length. Used for cockle, oats, wild buckwheat removal.

6. Spiral separator

A spiral chute down which grain rolls. Round seeds (vetch, mustard) roll faster and fly off by centrifugal force, while flat grains (wheat, oats) slide down near the centre.

7. Specific-gravity (gravity) separator

A vibrating, inclined, perforated deck with air blowing up through it. Heavy grains settle and move up the slope, while light grains float and move down. Used to separate by density — shrivelled and insect-damaged grain from sound grain, seed grading.

8. Destoner

A gravity-type machine (air-and-vibration) that removes stones of the same size as the grain — essential before milling (stones in rice, pulses and wheat). The stones, being heavier, move to the upper side of the vibrating deck.

9. Magnetic separator

Permanent magnets or drums remove iron particles and tramp metal before the grain enters a mill (protecting machines and avoiding sparks).

10. Colour sorter (optical sorter)

Grain falls in a thin stream past cameras or photo-sensors, which compare the colour (or near-IR reflectance) with a reference; discoloured or foreign grains are removed by air jets. Used for rice, pulses, coffee, nuts and plastics; very high accuracy but costly.

11. Other separators

  • Velvet roll separator — removes rough seeds (dodder, thistle) from smooth ones.
  • Inclined draper (belt) separator — round seeds roll off the belt, flat seeds are carried up.
  • Electrostatic separator — separates by surface charge.
  • Floatation (wet) cleaning — in water, to separate light and heavy or stones; used for pulses, rice, fruits, vegetables (followed by drying).

Performance of a cleaner

Let a feed of mass contain a fraction of impurities and give a clean product of mass with a fraction of impurities.

  • Cleaning efficiency (impurity removal) .
  • Purity of the product .
  • Capacity — kg/h of grain handled; depends on the screen area, vibration, grain depth and inclination: typical air-screen cleaners 0.5–10 t/h for small to medium models.
  • Loss of good grain (in the reject) .
Worked ExampleExample — cleaning efficiency

A cleaner receives 1000 kg of wheat containing 4 % impurities. The clean output is 955 kg with 0.5 % impurities.

Impurity in feed kg; impurity in product kg.

Cleaning efficiency . Product purity . Reject = kg, containing kg impurity and kg of good grain, i.e. grain loss.

Part 2 of 3

Rice Milling & Parboiling

Last reviewed 1 Oct 2026 · 9 min read

Structure of paddy

Paddy (rough rice) consists of:

Part Share (by mass) Notes
Husk (hull) about 20–22 % Outer protective cover (lemma and palea); high in silica; a fuel and by-product
Bran (pericarp, seed coat, aleurone and germ) about 8–10 % Rich in oil, protein, vitamins (B), fibre
Endosperm (white rice) about 68–70 % Mostly starch; the edible white rice

Brown rice is paddy with the husk removed (about 78–80 % of paddy); white (milled) rice has the bran and germ removed (about 68–70 %). Head rice is whole or large pieces (at least about three-quarters of the grain); broken rice is smaller pieces.

Objectives of milling

  1. Remove the husk (de-husking, shelling or hulling).
  2. Remove the bran and germ (whitening or polishing) to give a white, palatable, longer-keeping rice.
  3. Obtain the highest possible yield of head (whole) rice with minimum breakage.
  4. Recover by-products — husk, bran, brokens.

Steps in a modern rice mill

FormulaFlow of a modern milling plant
  1. Pre-cleaning — remove stones, straw, dust and other impurities (sieves, aspirator, destoner, magnet).
  2. De-husking — rubber-roll huller (or under-runner disc huller) removes the husk from paddy.
  3. Husk aspiration — air separates the husk from the brown rice and paddy.
  4. Paddy separation — separates un-hulled paddy from brown rice (paddy table, compartment separator) and returns the paddy to the huller.
  5. Whitening (de-branning) — removes the bran layers in one or two passes (abrasive and friction whiteners).
  6. Polishing (optional) — smoothens the surface and gives a gloss (brush or friction polishers; water mist).
  7. Grading — separates head rice, brokens, and brewers' rice (indented-cylinder or sifter).
  8. Colour sorting — removes discoloured or damaged grains.
  9. Packing and storage.

Types of rice mills

Type Description Features
Traditional (hand-pounding, chakki, dhenki) Pounding or stones; very low capacity Poor yield and quality
Huller mill (Engelberg huller) A single-pass machine: a ribbed cast-iron cylinder rotating in a perforated screen; husk and bran removed together Cheap and simple; low head-rice yield (about 55–60 %), high breakage; common in small rural mills
Sheller-cum-polisher mill Shelling (rubber-roll or disc shellers) followed by a cone polisher Medium quality; better yield than the huller
Modern (multistage) rice mill Separate steps — cleaning, shelling, paddy separation, whitening, polishing, grading High milling recovery (about 65–70 %) and head rice of 60–65 % of paddy; capacities 1–10 t/h; the standard in commercial mills
Mini rice mill A compact version (0.5–1 t/h) Used in villages

De-husking (shelling) machines

Rubber-roll husker (sheller)

  • Two rubber-covered rolls rotate in opposite directions at different speeds (about 25 % speed difference; peripheral speed about 15–20 m/s) with an adjustable gap.
  • Paddy passes between them; the differential speed creates a shearing force that splits the husk while the rubber cushions the kernel (low breakage).
  • Husking efficiency 80–90 % in one pass; roll life depends on the paddy handled (a pair of rolls can process about 100–200 t of paddy depending on conditions).
  • Best for low breakage; the commonest commercial husker.

Under-runner disc husker (sheller)

  • Two cast-iron discs coated with an abrasive (emery) mixture; one rotates, one is stationary (under-runner in some types).
  • The paddy is sheared and abraded between the discs; the gap is adjusted for the grain size.
  • Cheaper than the rubber-roll type but gives more breakage and discs wear quickly.

Impact huskers and centrifugal shellers

Paddy is thrown at high speed against a rubber or abrasive ring; the impact removes the husk. Lower efficiency; used in some small units.

Whitening (de-branning)

Abrasive whitener

A rotating cone or cylinder coated with an abrasive (emery) inside a perforated screen. The rice is scoured by abrasion; bran is rubbed off and passes through the screen. Higher capacity, lower pressure, but gives more breakage if run too hard; the grains are less glossy.

Friction (jet) whitener

A ribbed (steel) rotor inside a perforated screen presses the grains against each other and against the screen; bran is removed by friction (grain-on-grain). Works at higher pressure, gives a better finish and lower breakage than the abrasive type. Air jets or water mist cool the rice and improve the polish.

Polisher

A brush or a friction cone with a water mist polishes the white rice to a glossy surface. Over-polishing removes the aleurone layer (rich in nutrients).

Degree of milling

The degree of milling is the extent to which bran is removed — under-milled, reasonably well-milled, well-milled, extra well-milled — judged by the colour and bran layers left (or measured by a milling-degree meter, which reads the whiteness). More milling gives whiter rice, but lower yield, more breakage, and loss of nutrients (B vitamins, minerals, fibre).

Part 3 of 3

Wheat, Corn & Pulse Milling

Last reviewed 1 Oct 2026 · 8 min read

Wheat milling

Structure of the wheat kernel

Part Share Notes
Endosperm about 81–83 % Starch and gluten proteins; the source of white flour
Bran (pericarp, seed coat, aleurone) about 14–16 % Fibre, minerals, B vitamins
Germ (embryo) about 2–3 % Oil, protein, vitamin E; removed in white flour (it shortens the shelf life)

The crease (a deep groove running along the kernel) makes it difficult to peel the bran completely — hence the roller system of progressive grinding rather than a single pass.

Cleaning and conditioning (tempering)

  1. Cleaning — magnetic separators, sieves, aspirators, destoners, scourers (to remove surface dirt), and disc separators remove foreign material; cleaned wheat is passed to the tempering bins.
  2. Tempering (conditioning) — water is added to raise the moisture to about 15–17 % and the wheat is rested for 8–24 hours (hard wheat longer). Purposes: toughen the bran so that it comes off in large flakes rather than powdering (which would darken the flour); mellow the endosperm so that it grinds easily into flour; improve the separation of bran from endosperm.

Roller flour milling

The milling process is a gradual reduction: the grain is broken, the endosperm particles (semolina, middlings) are separated and purified, and reduced to flour by successive roller passages, each followed by sifting.

FormulaFlow of a roller flour mill
  1. Break system (usually 4–5 breaks) — corrugated (fluted) rolls with differential speed (2.5 : 1); the grain is opened and the endosperm scraped from the bran in chunks (semolina and coarse middlings) with as little bran as possible broken.
  2. Plansifter — a stack of oscillating sieves that separate the stock into coarse (bran), semolina and middlings, and flour, passing each fraction to the next stage.
  3. Purifiers — air and sieve machines separate bran specks from endosperm particles in the semolina by size, density and air velocity.
  4. Sizing (grading) rolls — reduce the semolina to uniform size.
  5. Reduction system (8–12 passages) — smooth rolls, differential speed (1.25 : 1); the purified middlings are ground to flour and sifted in turn.
  6. Bran finishers (bran brushers/dusters, scourers) — recover adhering endosperm.
  7. Flour blending, bleaching and fortification, packing.

Extraction rate and products

Extraction rate .

Product Extraction Description
Maida (refined/white flour) about 70–75 % (straight-run white flour 72–78 %) Fine, white; from the endosperm only; low in ash (about 0.5 %); for bread, biscuits, cakes
Suji (rawa, semolina) by-product of milling (about 10–15 % of wheat in a flour mill) Coarse endosperm particles
Atta (whole-wheat flour) 95–100 % (or 90–95 %) Contains bran and germ; made in chakki mills or roller mills; for chapatis
Wheat bran about 14–25 % Feed, fibre supplements
Wheat germ about 1 % (separate stream) Oil and nutritional supplements
  • Ash content (mineral) of flour rises with extraction because bran has more ash; it is a grade indicator (refined flour: about 0.5 %; whole-meal: about 1.5–2 %).
  • Wheat types: hard wheat (high protein, vitreous; bread) vs soft wheat (low protein; biscuits); durum wheat (pasta, semolina); the Triticum aestivum (bread wheat) is the commonest.

Chakki (stone) milling of atta

The stone mill (chakki) has two circular stones (millstones) — one fixed, one rotating at about 400–900 rpm. The wheat is ground in one pass between the stones, giving whole-wheat atta with the bran and germ. The product is coarser, the taste preferred for chapatis; heat from friction can raise the temperature and reduce keeping quality. Modern atta chakkis use steel or composite plates with sieving.

Quality tests for flour

Moisture, ash, gluten content (wet gluten 25–35 % for bread flour), falling number, water absorption (farinograph), granulation, colour (Pekar test), and freedom from insects and foreign matter.

Worked ExampleExample — extraction rate

A mill processes 100 t of wheat per day and obtains 74 t of maida, 12 t of suji and 14 t of bran (including germ).

Maida extraction ; total flour and semolina ; the bran/offal (a mass balance of 100 t, assuming no loss).

Maize (corn) milling

Kernel structure

Maize kernel: endosperm about 82 % (hard, vitreous in flint corn; floury in dent corn), germ about 11–12 % (large, rich in oil), pericarp (bran) about 5–6 %, tip cap 1 %. The large germ makes the grain oil-rich, which shortens the shelf life of meal.

Dry milling

Used for maize meal, grits, flour and flakes; degermination is the key step.

  1. Cleaning and tempering (moisture to about 20–22 %).
  2. Degerming (degermination) — in a degerminator (an impact/attrition machine) that removes the germ and bran from the endosperm.
  3. Roller milling — the endosperm is reduced to grits (coarse), meal, flour, sifted and purified; the germ is separated by a gravity table.
  4. Products: corn grits (for breakfast cereals, corn flakes, brewing), corn meal, corn flour, germ (oil), bran and feed.

Wet milling

Used to separate the grain into starch, protein (gluten), fibre and oil.

  1. Steeping — maize is steeped in water containing 0.1–0.2 % sulphur dioxide at 48–52 °C for 30–48 hours; softens the kernel and loosens the starch–protein bonds.
  2. Coarse grinding and germ separation — hydrocyclones separate the germ (lighter) from the rest.
  3. Fine grinding and fibre (bran) separation — sieves (DSM screens) remove the fibre.
  4. Protein–starch separation — centrifuges or hydrocyclones: gluten (protein) being lighter is separated from starch.
  5. Starch washing, drying, or conversion to glucose, high-fructose corn syrup, dextrose, sorbitol, ethanol.
  6. Products: corn starch, corn syrup, corn oil (from the germ), gluten meal (60 % protein), gluten feed, steep liquor.

Maize quality

Moisture 12–14 % for storage; aflatoxin is a risk in damp storage; hardness (flint vs dent) affects milling.

Milling of pulses (dal making)

Pulses (arhar/tur, moong, urad, chana, masoor, peas) are de-husked and split to make dal. Pulse milling is complicated because the husk (seed coat) adheres firmly to the cotyledons through a gummy layer; so a pretreatment is applied.

Traditional (wet and dry) processes

  1. Cleaning and grading.
  2. Pitting (scarification) — a roller (emery-coated) scratches the husk to allow oil and water to penetrate.
  3. Oil application (a thin coating of edible oil, 0.2–0.5 %), mixing, and sun-drying (tempering) for 12–24 hours — loosens the husk; or water-soaking and drying (wet method; sweating).
  4. Dehusking in a huller (emery-coated roller or disc huller, or a stone chakki) — the husk is removed and the pulse splits.
  5. Aspiration — separates the husk from the dal.
  6. Sieving (grading) — separates dal, brokens, powder and un-hulled grains; un-hulled grains go back for a second pass.
  7. Polishing (optional) — with a little oil or water, for a bright finish; by brush polishers.

Modern pulse mills

  • Pitting-conditioning-dehusking are done continuously with improved rollers, aspirators and graders; CFTRI (Mysuru) and CIAE (Bhopal) have developed mills and wet-conditioning methods.
  • Recovery: typically 70–75 % dal from the pulse (higher with the improved process: moong 80 %, chana 70–75 %, tur 72–76 %); husk 10–15 %, brokens and powder 8–10 %.
  • Losses are reduced by pretreatment, proper roller settings and optimum moisture.

Special cases

  • Moong (green gram), urad — whole, de-husked (washed) or split; urad has a mucilaginous husk and is softened by wetting.
  • Chana dal — Bengal gram is split and polished; the husk is hard — pitting and mild moisture conditioning are important; besan (flour) is made from the dal by grinding.
  • Tur dal — hard husk; oil and water treatment with tempering for 1–2 days improves the yield.
  • Pea dal and masoor dal — de-husked and split by emery rollers.
Worked ExampleExample — dal recovery

100 kg of tur (arhar) is milled. It gives 74 kg of dal, 14 kg of husk and 12 kg of powder and brokens.

Dal recovery . The loss is the brokens and powder (12 %) — the process target is to reduce this by proper conditioning and roller adjustment; the husk is a by-product (feed).

By-products and uses

  • Wheat bran — feed, fibre; maize germ — oil; gluten — feed, textured protein; pulse husk and brokens — cattle feed; chuni (broken dal) — feed or flour.

Frequently tested points

  • Wheat: endosperm about 82 %, bran about 14–16 %, germ 2–3 %; tempering moisture 15–17 %.
  • Roller milling: breaks (corrugated rolls) → sizing → purifier → reductions (smooth rolls) with plansifters.
  • Maida extraction about 70–75 %; atta 95–100 %; ash indicates grade.
  • Maize: dry milling (degermination; grits, meal) vs wet milling (steeping with SO₂; starch, gluten, oil).
  • Pulse milling: pitting, oil/water conditioning, dehusking, splitting, polishing; dal recovery about 70–75 %.
Common MistakeCommon mistakes
  • Skipping tempering (the bran powders and darkens the flour).
  • Treating maida and atta as the same (extraction rate and bran content differ).
  • Dehusking pulses without pretreatment (poor recovery, high brokens).
Revision SummarySummary
  1. Wheat is cleaned, tempered and ground by roller systems — break, sizing, purification and reduction — with plansifters.
  2. Flour grades depend on extraction rate and ash; chakki atta keeps the bran and germ.
  3. Maize is milled dry (grits, meal) or wet (starch, gluten, oil, syrups).
  4. Pulse milling loosens the husk (pitting, oil, water), dehusks, splits and polishes.
  5. By-products — bran, germ, gluten, husk — are used as feed and for oil.

Finished reading? Test yourself.

A timed chapter test from the UPSSSC JE Agriculture series, on exactly this chapter.

Practice this chapter →