Notes library · Technical

🧮 Finite Element Method & Structural Modelling Notes

Finite element concepts, elements and shape functions, meshing, boundary conditions and loading, linear and non-linear analysis, construction-stage analysis, dynamic analysis and validating software results.

6 of 6 chapters written

Chapters

  1. 01Basics of the Finite Element Method, Elements & Shape FunctionsThe idea of the finite element method, the stiffness-method steps from discretisation to solution, the bar and beam element stiffness matrices, shape functions and their properties, common one-, two- and three-dimensional elements, isoparametric formulation and Gauss integration, and convergence — with a worked assembly example.Read →
  2. 02Meshing, Boundary Conditions & LoadingHow to build a reliable finite element model — mesh density, element quality, refinement near stress concentrations, symmetry; essential and natural boundary conditions, supports as springs, rigid links and constraints; how loads are applied and converted to equivalent nodal loads, and the checks that prevent unstable models and wrong units.Read →
  3. 03Linear & Non-linear Structural AnalysisThe assumptions of linear analysis and where they fail; geometric non-linearity (large displacements, P–Δ, cable sag), material non-linearity (plasticity, cracking, creep) and contact; incremental–iterative solution with Newton–Raphson, load and displacement control, arc-length method, convergence criteria; buckling analysis and pushover analysis.Read →
  4. 04Construction-Stage & Time-Dependent AnalysisWhy the sequence of construction matters, how staged analysis is set up (activation of elements and loads, changing supports), creep, shrinkage and prestress-loss models, redistribution of forces when the structural system changes (Dischinger's method), forward and backward analysis of cable-stayed bridges, geometry control and camber, and checks at each stage.Read →
  5. 05Dynamic & Seismic Analysis in SoftwareThe dynamic equation of motion for a finite element model, mass and damping matrices, modal analysis (natural frequencies and mode shapes, mass participation), response-spectrum analysis and modal combination rules, time-history analysis with direct integration, seismic modelling choices (soil springs, bearings, isolation) and how to check the results.Read →
  6. 06Modelling in Design Software & Validating ResultsHow bridges and buildings are idealised in structural software — beam-line, grillage, shell and solid models, girder and box-girder modelling, bearings, piers and foundations, load definition and moving loads — the software commonly used, and a disciplined procedure for interpreting and validating results with equilibrium checks, hand calculations, benchmarks and peer review.Read →

Exams that include Finite Element Method & Structural Modelling

Open your exam to see only the chapters its syllabus asks for.