← Chemical Engineering Basics

Fluid Flow & Mechanical Operations

Reynolds number and flow regimes, laminar pipe flow (Hagen–Poiseuille, f = 16/Re), hydraulic diameter, flow meters, pump cavitation and NPSH, non-Newtonian fluids, Stokes settling, size-reduction laws, screening, filtration, cyclones, packed and fluidised beds.

📑 Contents (4 sections)

Last reviewed 17 Nov 2026 · 2 min read

1. Flow regimes

FormulaReynolds number

— laminar below about 2,100 in a pipe, turbulent above about 4,000.

  • Hagen–Poiseuille (laminar): — pressure drop rises linearly with flow rate.
  • Friction factor in laminar flow: Fanning f = 16/Re, Darcy f = 64/Re (Darcy = 4 × Fanning).
  • Hydraulic diameter of a non-circular duct: .
Worked ExampleWorked example

Water ( = 1000 kg/m³, = 0.001 Pa·s) at 0.5 m/s in a 50 mm pipe: → turbulent.

Practise this chapter for your exam

This chapter is in the syllabus of 1 exam. Take its chapter test, then the full mock tests of your exam.