Notes library · Technical
🔍 Bridge Rehabilitation & NDT Notes
Bridge inspection and condition assessment, non-destructive testing, deterioration and failure diagnosis, load rating, repair and strengthening, steel bridge rehabilitation, bearing replacement and quality assurance.
7 of 7 chapters written
Chapters
- 01Bridge Inspection & Condition AssessmentWhy bridges are inspected and the types of inspection (routine, detailed, special, emergency), planning and access, what to look for in each component, recording and distress mapping, condition rating systems, the step from visual findings to detailed testing, and how inspection results drive maintenance priorities and safety decisions.Read →
- 02Non-Destructive Testing MethodsThe main non-destructive tests for concrete and steel bridges and what each detects — rebound hammer, ultrasonic pulse velocity, cover meter, half-cell potential, resistivity, ground-penetrating radar, impact-echo, core and pull-out tests, carbonation and chloride tests, and for steel ultrasonic, radiographic, magnetic-particle, dye-penetrant and eddy-current testing — with interpretation and limitations.Read →
- 03Deterioration, Failure Diagnosis & Load RatingThe mechanisms that damage concrete and steel bridges — reinforcement corrosion by chlorides and carbonation, alkali–silica reaction, sulphate attack, freeze–thaw, abrasion, fatigue, overload, scour and settlement — how to diagnose a failure from its pattern, and how to rate the remaining capacity of a deteriorated bridge using the rating factor, residual strength and section loss.Read →
- 04Repair Materials & TechniquesThe principles of concrete repair (find and remove the cause, remove unsound concrete, treat the steel, restore the section), repair materials — polymer-modified mortars, micro-concrete, shotcrete, epoxy and polyurethane injection resins, grouts, coatings, corrosion inhibitors, cathodic protection — and the techniques of patch repair, crack injection, stitching, overlays and joint repair, with quality control.Read →
- 05Strengthening — Jacketing, FRP & External PrestressingWhen and why a bridge needs strengthening, and the main methods — concrete and steel jacketing of columns, piers and girders, section enlargement, externally bonded steel plates, fibre-reinforced polymer (CFRP, GFRP) wrapping and plating for flexure, shear and confinement, near-surface-mounted bars, and external prestressing — with design principles, limits and a worked FRP example.Read →
- 06Rehabilitation of Steel Bridges, Fatigue & CorrosionAssessing and rehabilitating old steel and riveted bridges — plate girders, trusses, stringers, cross-girders, bracing and gusset plates — strengthening with cover plates and stiffeners, replacing rivets with HSFG bolts, repairing fatigue cracks, corrosion repair and repainting, heat straightening, member replacement and load redistribution, and the durability details that prevent the problem from returning.Read →
- 07Bearing & Joint Replacement, QA/QC & Load Testing After RepairWhen and how bridge bearings and expansion joints are replaced — jacking arrangements, lifting limits, removal, pedestal preparation, installation, setting offsets and lowering — plus the specifications, method statements, inspection and test plans, hold points and records that make a repair reliable, and the load tests and monitoring that verify performance after rehabilitation.Read →
Exams that include Bridge Rehabilitation & NDT
Open your exam to see only the chapters its syllabus asks for.